It's listed for sale here - https://www.jwmodelrailways.com/product-page/sl-e86x-electrofrog-right-hand-curved-turnout Described as "universal"...
The spare purple wire is to provide the 4th function rather than stay-alive.
Personally I think we're worrying about nothing when it comes to having the DCC bus as a loop. Total bus length is far too small to cause a...
The latest CV-Editor is not on the 23151 CD - just the old version that is dated 2008, so you do need to download the current version from the...
I have the 23151 and it works very well indeed. It has a different internal chip and the drivers for this one are actually part of Windows itself,...
You have a very old version of the Lenz CV-Editor installed. The latest version is 1.5 and can be downloaded from here -...
If you're DCC you could use a PSX-AR auto-reverse module from DCC Specialities. It includes a facility to switch a turnout as well as reverse the...
One other question - what DCC command station are you using? For an auto reverse module to work reliably it needs to detect the short before the...
Does the coach work OK on the classic loop on the left? And as far as turnouts are concerned, do they have live frogs (Electrofrog) and if so is...
If the polarity is wrong on entry, it will be triggered immediately then. The polarity reverse will always be triggered on exit (ie when the loco...
Just to confirm something else - there are IRJs on both rails at both ends? My only thought now is that the current inrush from the coach when it...
The LK200 is a solid-state reverser. It's the older LK100 which is relay-based. However, I don't understand how the problem occurs. Surely the...
All my Pullmans have a pickup bar across the centre of the axles. The wheels are live on one side and insulated on the other, with the wheels on...
Is this one of the latest Pullmans, and if so does it actually have pickups on all 8 wheels? All the lighted Hornby Pullmans I've got have LH...
Hi there - suggest you check which version you have now? It's possible Windows updated it automatically. Display the driver version via the device...
The drivers will stay loaded on Windows as long as you make Windows update them to the current version, as I explained in my post #11. I don't...
Hi Colin - it's not too difficult to install unsigned drivers if that is your only option. No messing with registry keys needed, just follow the...
Lenz have not abandoned the USB interface. The LI-USB (23150) works fine with Windows 10 (32 or 64 bit) with the correct FTDI drivers. It's...
A little while ago Lenz themselves put updated drivers on their website for Windows 10 and the LI-USB. See here -...
Indeed there are 2 screws. They are about 2/3rds back if you look closely at the picture. They are quite difficult to spot when looking at the...